The hero of today’s review will be a Galaxies MTL RTA cigarette tank with an interesting blowing system, which Vapefly produces.
There is nothing special to say about the Chinese manufacturer Vapefly , this is a young and rapidly growing company in the vaping market, producing quite entertaining devices, most of which are cigarette makers.
So, this company has a whole line of devices under one common name Galaxies, which includes a tank, a drip and a bacodrip . Well, let’s get acquainted with the tank under the tight tightening Galaxies MTL RTA.
Packing and packaging
The device comes into the hands of the future owner in a dense white cardboard box with an upper casing dazzling with various inscriptions.
On the front side there is the name of the manufacturer, a schematic representation of the Galaxies MTL RTA tank and, in fact, its name.
There is much more information behind, including a brief description of the device in the box, warnings and other legal information, links to Vapefly social networks and a security code for checking the device for originality .
After separating the top cover of the package, we find the Galaxies tank lying in the foam backing. Nearby are two more important elements of a complete set: an additional 510th drip-type from delrin and “bellied” glass, which increases the capacity of the device.
All other accessories, as it should be, are at the bottom of the box.
Options Vapefly Galaxies MTL RTA
- Buck Galaxies MTL RTA
- “Bubble” glass for 5 ml
- 510th Delrin Drip Type
- Cotton record
- Ni80 26ga Two Helix
- T-shaped screwdriver
- Hex key
- O-Ring Set
- Spare screws
- Replaceable airflow
- User’s Manual
Appearance and constructive
Galaxies MTL RTA is currently sold in just three colors: black, steel and gold.
What is noteworthy is that for each individual color different drip types will go by default, and only in black the tank will be decorated with the mouthpiece made of heat-resistant ULTEM plastic.
Not to say that this device differs in some interesting and unique appearance. In the design of the tank a bit of everything from different devices, such a compilation.
Those decorative elements that can be found on the Galaxies MTL RTA case allow the device not to look faceless, that’s all.
Describing the exterior of the atomizer, it is possible to note the inscription on the dome of the evaporation chamber with the name of the tank, typical engravings on the connector part, as well as a rather large drip-type cigarette holder.
As for the complete mouthpieces, then, as mentioned above, complete with the tank are supplied two identical in appearance and different in material drip-type.
Both versions are made in an interesting way in terms of shape and size, but the latter figure does not add to the usability at all, which we will discuss in the debriefing.
Just below the drip-type, oddly enough, there is a filling cap, on which recesses for a more comfortable grip are cut from two opposite sides, and which, running ahead, do not work at all.
One silicone seal from the inside ensures the tightness of the entire structure and the filling holes of sufficient size. Unfortunately, there are no sides to prevent the extrusion of liquid droplets when the lid is tightened, but it would not hurt.
Consider the ingenious system of blowing Galaxies MTL RTA, which is one of the main distinguishing features of the device. Instead of the usual adjusting ring, Vapefly implemented a slightly different and very interesting way to adjust the tightness of tightening.
There are two wheels like those in the watch. On each “twister” there are two Roman numerals: I, II and III, IV. The smaller the number, the tighter the tightening will be, which is logical.
It is possible to combine numbers, or simply block one of the holes. The wheels spin very freely, there is no stopper, but there is knurling for convenience, at least for that thanks.
The dome of the evaporative chamber in Galaxies MTL RTA could be, frankly, and smaller, which would add a little taste to the device. But inside there is a spherical treatment.
In addition, this part of the structure serves as a link and keeps the entire structure on the thread inside the evaporation chamber, as well as from the outer part of the base.
The base of the device – the second after the above-mentioned wheels “chip” Galaxies MTL RTA. The implementation of the pillars and the method of installing the spiral, in this case, is customary; there are two screws for clamping the coil legs and the space in the racks diagonally under these very legs.
Grooves for cotton are not through, each has two openings for the supply of fluid, as well as sides to prevent wool from getting into the threads when assembling the tank.
In the center of the deck is the lower airflow helix, made in a replaceable form. The so-called jets are rectangles, in each of which holes of different sizes are drilled.
So, in the pre-installed blowing, you can choose either one small hole or two smaller ones. The additional rectangle, in turn, has one round hole and one oval, this option provides a looser tightening than the one that stands in the tank initially.
The jets are replaced by unscrewing /tightening a special screw hidden in the bottom of one of the racks.
Technical characteristics of Vapefly Galaxies MTL RTA
- Height: 49.45 mm
- Diameter: 22.2 mm
- Material: SS
- Colors: black, steel, gold
- Spaciousness: 2 ml (TPD) / 3 ml / 5 ml
Winding and starting
As a winding, it was decided not to use complete coils, but to try the tank on its standard spiral of 0.3 nichrome, 5 turns, on a 2.5 mm frame.
Surprisingly, the racks willingly coped with such a thin wire. An important point: due to the location of the racks it is necessary to wind counterclockwise.
However, there were no difficulties in launching the tank, just pay attention to cutting the legs of the helix as close as possible to the racks in order to avoid a short circuit on the dome of the evaporation chamber.
The approximate amount of wool is determined by the diameter of the tank. Naturally, ramming cotton in the grooves is not worth it, otherwise there will be problems with the conductivity of the liquid.
The ends of the wick should be located freely in their places, but close the holes in the slush feed completely, for which procedures can be done to give volume and pomp to the cotton.
After all the manipulations, the cotton wool must be simply moistened and, if necessary, corrected a little more to prevent contact with the threads when winding up the dome of the evaporation chamber.
Impressions and conclusions
For all its interest and, one can say, uniqueness, the Galaxies MTL RTA tank came out as a completely ambiguous device.
On the one hand, the device is full of advantages in the form of a rich set, which has everything to start the tank out of the box, as well as an additional “bubble” flask and drip-type.
A good workmanship also pleased, the device feels solid, knocked down, all the details fit tightly to each other, and the internal processing is similarly performed at a high level.
An impressive volume of 3 ml or 5 ml also will not leave indifferent fans of cigarette puffs, as it allows for a long time with any chosen variant of the flasks to remain autonomous.
And, of course, the total airflow system allows you to play with a puff as you please. Replaceable jets is not a new solution, but in Galaxies MTL RTA it is implemented differently from everyone.
The wheels for adjusting the blowout look quite sane, the “lame” only their implementation, although they work, allowing you to achieve the desired tightening.
On the other hand, the above-mentioned adjustment wheels, unfortunately, only harm the comfortable use of the tank, because they rotate too easily, have no stoppers, and trying to knock down all the settings, only the user touches the tank at the bottom.
Again, the idea is good, but not thought out.
The remaining disadvantages are not so critical and they touch the top of the device, where the filling cap and drip-type are located. The latter is not digestible for use in MTL devices due to its diameter and size. However, this is a subjective minus.
Another annoying feature of Galaxies MTL RTA I would like to call the refueling cap, although it has notches for convenient unscrewing, but still not amenable to, sometimes, this unscrewing itself.
Here and periodically squeezed out a drop of liquid during refueling.
The last thing I misunderstood is the taste transfer of the tank. It is not bad here, liquids give up their taste completely, but the device cannot be called a record holder for this indicator either, the average level is sufficient, although it depends in some way on winding.
In general, Galaxies MTL RTA is a good device with its pluses and minuses, which is characteristic of almost any vape device, nothing ideal happens.
Click Here Ave40 For Vape Wholesale Cooperation.
Now It’s Available: Vapefly Galaxies MTL RTA
Hot Sale Recommendation:
Vaporesso Aurora Play Zippo Pod Starter Kit
Justfog Compact 14 Starter Kit
Rincoe Mechman Mesh Kit
Voopoo Drag Nano Kit
Voopoo Drag Baby Kit
Disposable Pod System Kit
Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.
WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html