Tesla XT 220W TC review – Great steampunk LED box mod with 21700 batteries

Tesla XT 220W TC

Tesla has released a great number of mods across the years, but this has to be their most beautiful creation ever. The Tesla XT 220W TC is a very solid and well-built box mod inspired from the steampunk genre. And it not only looks superb but it’s also a flawless performer. The device can easily reach a maximum output of 220W and works with 18650, 20700 or 21700 batteries. In addition it’s very easy to use and it’s perfect for any type of vaper.

PROS:

Beautiful design

Great LED lights

Build quality and materials

CONS:

Maximum 24mm atomizers without overhang

What you get with the Tesla XT vape

The Tesla XT 220W TC feels premium from the first time you lay eyes on it. It comes packaged in a high end slide to open cardboard box. Inside you will find the box mod vape a charging cable and user manual.

Tesla XT packagingAvailable colors are: Gunmetal, Silver, Blue, Green, and Purple.

Tesla XT mod: Design and main features

The Tesla XT 220W is not to company’s first steampunk inspired box mod. We might even argue that this is an improved version of the original Tesla Punk. In fact it’s smaller than its predecessor but comes with the most beautiful LED lights. The body is made from solid Zinc Alloy and the build quality is well above the price range.

The device measures 80mm x 52mm x 24mm and weighs 220g without cells. It has a spring loaded 510 connector on top and it can accommodate atties up to 24mm in diameter without overhang. In addition, the fire button, on/off button, display, adjustment buttons and micro-USB port are all placed on the main side.

Tesla XT modTo access the battery compartment you need to slide and unlock the door on the bottom, and this time they used a hinge. The device works with 18650, 20700 or 21700 high drain cells. When using 20700 or 21700 the sleeves need to be removed.

The Tesla XT has a solid, metallic back with the ‘XT’ logo on the center. Consequently the front of the device is made from clear polycarbonate and it’s one of its key design points. The see-through panel hides 5 LED lights which give the mod its unique appearance.

The board and LEDs

This mod is powered by a highly responsive Tesla developed board. It features variable wattage between 7W – 220W and a maximum output voltage of 7.5V. Additionally, the maximum allowed current is 50W and minimum resistance in TC mode is 0.05 Ohms.

There are three pre-heat options: Normal, Soft, and Hard and there’s even a fully customizable ‘User’ preset. Temperature range is 200 – 600F and works with Ni200, Titanium and SS316.

To customize LED colors just keep the fire and up buttons pressed at the same time to cycle through the various options. You can choose from three multiple color schemes as well as single color presets: Blue, Red, Green, or Purple. There’s even an option to turn them off completely, and this is a big pro for those who don’t like the feature.

Tesla XT display

Performance and final words on the Tesla XT vape

The Tesla XT 220W TC is one of the most beautiful mods we tested in 2018 and definitely a big improvement over the original Punk model. It’s easy to use, intuitive, powerful and comes with some of the bet-looking LED lights on the market. The board is accurate and features all the temperature control presets you will ever need. Battery life is outstanding, especially when using big 21700 cells.

The only con we found is that the mod only looks nice with 24mm atomizers on top. And while this diameter is one of the most popular at the moment, it would have been great to use 28 – 30mm RDAs too.

Now It’s Available :Tesla XT 220W Kit

Hot Sale Recommendation:

Voopoo Panda

Hellvape Drop Dead RDA

Hellvape Dead Rabbit RTA

Vaporessso Polar Kit

Voopoo Vmate TC 200W Box Mod

Voopoo Vmate 200W Kit With Uforce T1 Tank

Vaporesso Luxe Kit

Vaporesso Luxe Mod

smok novo

dovpo topside

voopoo vfl

voopoo vfl pod

joyetech ultex

vladdin under kit

smoant naboo

vaporise drizzle

 

FreeMax Mesh Pro Sub-Ohm Tank Review

The FreeMax Mesh Pro Sub-Ohm Tank  is due to arrive on vendor shelves any minute, definitely in the next week to 10 days anyway, but we’ve been lucky enough, along with several other reviewers, to be testing them for about a month. Because we don’t exactly have great relationships with manufacturers of vape products due to our tendency to call a spade a spade, Freemax is one of the few still willing to work with us. (Could be because they make great tanks and they know we know that).

If you’re reading this review after July 7th2018, chances are Element Vape will be fully stocked with what is being described as Freemax’s ultimate edition of the FireLuke series. Is it the greatest sub-ohm tank on the planet right now? Some will think so, some will not, but no one will argue that it is a damn fine sub-ohm.

The Freemax Mesh Pro Sub-Ohm is not a small tank, not in physical size, coil size, or even e-juice capacity. The e-juice capacity changes according to the Coil you’re using, as well as the glass tank. Like the new SMOK TFV12 Prince Cobra, this tank offers a Globe shaped glass tank, the only difference is that the glass globe tank is in the box already and not a separate purchase as it is with SMOK. You won’t find any silly acrylic parts in the Freemax Mesh Pro either.

The tank is constructed with Stainless Steel with a Resin coating. Of all the features, it’s the Resin I’m most bored with. Like every product in the vape industry, any new feature that sells is going to be overused until people like me cry “Enough!” …. Just a few months ago we reviewed the Freemax Fireluke Pro Sub-Ohm that is so much more attractive, and I think Freemax should have chosen this design path with the “ultimate edition”. That said, the Resin finish doesn’t affect the performance and shouldn’t play a part in the decision to purchase one or not.The 810-Drip tip has a U-shape anti-spitback design with an inner silicon o-ring inside the top cap, so all other 810 drip tips are also compatible. The adjustable 510-pin is compatible with all mods as well. The Freemax Mesh Pro is a full 25mm wide tank at the bottom base, and the default bubble glass with the default double-mesh coil offers 6mL of e-Juice Capacity.

Additionally, the Freemax Mesh Pro features two large airflow slots on the base (16mm by 4mm each), and a very easy slide out top-fill system. Once filled, with the airflow slots wide open the draw is immense, creating huge clouds, but not the best flavor. I needed to close the airflow slots about two-thirds of the way before finally finding the intense flavor these coils are capable of.

The Mesh Coil Takes Center Stage

Freemax introduces a new multi-mesh coil system, an achievement that features much more surface area resulting in an even heating of pure Linen-Cotton and e-Juice offering a fantastic vaping experience. Linen-Cotton is said to offer a better flavor, but right now I’m sitting on the sideline for this one.

Freemax sent us several packs of coils in addition to the two coils that come with the tank. In the box with the Freemax Mesh Pro are the Double Mesh, rated for 60-90 watts, and the Single Mesh, rated for 40-70 watts. As with many Mesh coils from different tank makers, the optimal wattage always seems to be on the higher end of the range, at least if you want the best flavor and vapor with some warmth.These new Mesh Pro Coils are compatible with the FireLuke Tank  and FireLuke Pro Tank  as well, which gives owners of the previous tanks the opportunity to experience a new vape sensation without investing in a new tank.

The default, preinstalled coil is the Double Mesh, and my optimal wattage for this 0.2-ohm Kanthal coils was 88W, just 2 watts short of the maximum suggested wattage. All the coil options tended to work this way, including the pack of SS316 stainless-steel coils we received. I should mention that while the SS316 coils packed a decent punch, the flavor fidelity for this reviewer wasn’t as authentic as the Kanthal coils. Interestingly, the double and triple mesh coils have a 360-degree “lead holes” for a better, faster saturation.

FreeMax Mesh Pro Replacement Coils Features

  • 0.15ohm Kanthal Single Mesh Coil – rated for 40-70W (thinner but longer)
  • 0.2ohm Kanthal Double Mesh Coil – rated for 60-90W (wider coil)
  • 0.15ohm Kanthal Triple Mesh Coil – rated for 80-110W
  • 0.12ohm SS316LSingle Mesh Coil – rated for 400-550° F

Focus On www.urvapin.com For Best Vape Tanks.

The Freemax Mesh Pro the SMOK TFV12 Prince Cobra

I don’t want to make a bigger deal than I need to here but having had some crossover vaping both the Prince Cobra and the Mesh Pro, it needs to be said that while I found the flavor pretty much identical between both tanks and their respective coils (except for the SS316’s in the Pro Mesh), the vapor production produced by the Pro Mesh, even at 88W with the Double Mesh, lagged behind the Prince Cobra. For pure volume of vapor the Prince Cobra takes the prize. They were very close, some might even say too close to call, but I could feel the difference.

Vaping with the Freemax Pro Mesh

Lately I’ve been using the SMOK Devilkin Mod as my test mod. The Devilkin outputs some 225W of power, plus temperature control, and is very comfortable to grip for long periods.

The Devilkin Mod comes with the original full-size SMOK Prince tank, with its 25mm width base, yet when using the Freemax Pro Mesh, and its 25mm stated diameter, there was a fairly significant amount of overhang on the base of the tank. Don’t ask me to explain, the Prince sat flush with the Devilkin, the Mesh Pro did not.

All the Freemax Coils designed for the Mesh Pro took at least an hour of moderate vaping to break in properly, but it was well worth the time. Once broken in the flavor increased, the vapor got thicker, and the vape experience became one luscious event. As an added benefit when using the Mesh Pro coils, I took note that these coils were far less ‘thirsty’ then the SMOK coils. A 6mL tank full of e-juice lasted significantly longer than a full 7mL tank of the Prince Cobra.

Switching glass tanks in modern sub-ohms are a pain in the butt, but in order to conduct an in-depth review I had to switch out the bubble tank with the globe tank. Removing a glass tank means upsetting the delicate O-rings holding the tank in place and providing a good seal. Do it wrong, or in a hurry, and you’ll wind up having to replace the O-rings, which are provided in the box. I was fortunate enough not to damage the O-rings in place, so I spent a day with the Mesh Pro and the globe glass tank.

The globe glass tank far extends the width of middle part of the tank, making it easier to shatter the glass should the tank fall off a table or out of your hand. It also looks a little strange. That said, to know that SMOK plans to offer a globe tank with the Prince Cobra, and the Mesh Pro already has one in the box, I have a feeling that the market is going to move toward more globe-style tanks, not less.

I understand the desire for more e-juice capacity, but can’t some manufacturer create a sub-ohm squonker instead? I would much rather have 8-9mL of e-juice buried in the mod rather than sitting a glass tank. Sub-Ohm tank users would love to squonk with a sub-ohm tank rather than an RDA, don’t you think?

Verdict

Without a doubt, if you’re looking for another Resin tank that promises supreme flavor and more than enough vapor, the Freemax Mesh Pro is a terrific buy. The price tag is less than the Prince Cobra (though you get 2 coils, not 3 that you get in the Prince Cobra).

While I may be tiring of Resin finishes on my mods and tanks, I can’t lower the score based on whether it is a Resin tank or not. The results speak for themselves, and the Freemax Mesh Pro is a good next step in the Freemax line of excellent sub-ohm tanks. At under $28, it has real lasting value.

Now It’s Available :Freemax Mesh Pro Sub ohm Tank-Compatible with Dual & Triple Mesh Coils

Hot Sale Recommendation:

Voopoo Panda

Hellvape Drop Dead RDA

Hellvape Dead Rabbit RTA

Vaporessso Polar Kit

Voopoo Vmate TC 200W Box Mod

Voopoo Vmate 200W Kit With Uforce T1 Tank

Vaporesso Luxe Kit

Vaporesso Luxe Mod

smok novo

dovpo topside

voopoo vfl

voopoo vfl pod

joyetech ultex

vladdin pod kit

smoant naboo

vaporesso drizzle

 

Geekvape Nova Kit Review | Classic Styling, Fresh Muscle!

geekvape nova kit mainIntroduction – The Nova Kit By Geekvape

The Geekvape Nova is the latest release from a brand that with every fresh release, their reputation for being a high end, trusty vape brand solidifies just a little more…and they’ve been releasing scores of new vaping products over the past 2 years. I, for one, have always found their manufacturing standards to be well above par and have fast become a big fan of the brand.

With recent wins like the Karma 2 mech kit, the Loop RDA and the beautiful Blade kit, I was expecting big things when I opened up my vape mail and to find a bit of fresh Geekvape gear inside. I wasn’t at all disappointed.

The Geekvape Nova kit, including 200W Nova mod and the sexy Cerberus tank with its Super Mesh coils, is a tribute to the trusty box mods of years gone by…with modern flair of course. The Nova, with its artful resin finish, is a box mod in the classical sense of the word.

Read on to find out just how the Nova kit and myself got on… This was sent to us for the purpose of review. As always my views are my own.

Focus On www.urvapin.com For More Vape Start Kit.

What’s In The Box

  • 1 x Nova Mod
  • 1 x Cerberus Tank
  • 2 x 0.2 Ohm Super Mesh coils (30-90W range)
  • Spare glass and uber o-rings
  • 1 x Micro USB cable
  • 1 x User manualgeekvape nova kit open

Features Mod

  • Advanced AS Chipset
  • 10 ms Fire speed
  • Dimensions 88 x 52 x 25mm
  • Runs on dual 18650s
  • Aluminium Alloy and Resin chassis
  • 120g Weight (without cells)
  • Comes in 8 colour combos: silver and flare, silver and onyx, silver and cobalt, silver and ember, black and flare, gunmetal and cobalt, gunmetal and ember, gunmetal and onyx
  • Colour screen
  • 200W Max output
  • Battery reverse protection, over heat protection, overcharge protection, switch timeout protection, over current protection, short circuit protectiongeekvape nova kit contents

Features Tank

  • 5.5ml with bubble glass and 4ml with spare glass
  • 46 x 27mm with bubble glass
  • Adjustable bottom airflow
  • Removable 810 delrin drip tip
  • Top Fill
  • Super Mesh Coils compatible with Geekvape Aero tank

Build Quality & Design

Nova Mod

On opening the super neat, black box packaging, I discovered I had received the silver and flare resin version…and I squealed with delight…since that was exactly the one I’d had my eye on.geekvape nova kit front

What a looker!

With the Nova mod, Geekvape has returned to dual 18650 styling basics, I’m talking classic dual 18650 rectangular box shape, with slightly rounded edges, of course.

All branding is on the base of the mod, leaving the beautiful aluminium alloy and resin box unmarred and pristine.

The aluminium alloy has a soft feel and is blast finished, it is extremely light but looks absolutely immaculate.

Both larger sides are ¾ resin finish, with the resin taking up the bottom and ending in a slanted upward sweep.

Resin

The resin wrapped around the sides slightly so that when looking at the mod from either narrow side, 2 thin bands of resin are visible either side.

geekvape nova kit sideThe resin patterning is absolutely beautiful and my silver and flare version is rich with oranges, turquoise, green and blue.

The resin parts have uneven and slightly slanting lines of ribbing running all the way up, serving as both grip and a uniquely organic aesthetic feature that brilliantly offsets the box like lines of the mid as a whole. Genius.

510 Connection

Slightly closer to one narrow end, on top of the mod, is an elongated, SS 510 seating with 2 screws in it and a deep, spring loaded 510 connection.geekvape new kit 510

Buttons and Screen

Down the side panel furthest from the connection, you’ll find a fire button at the top, then a round-cornered rectangular screen below that, two adjustment buttons one on top of the next below that and a micro USB port below that.

A seam runs in line with the place where the resin overlap ends, around all narrow sides of the mod.

The fire button is 12mm in diameter and has that high-quality concentric ring texturing, it seems to also me Aluminium alloy but may well be SS, it is perfectly clicky.

The screen is 21 x 10 mm and has a user-friendly layout with wattage on top in huge numbering, with resistance, voltage, amps and puffs in a line below that. It’s super bright and has a nifty sleep function.

The adjustment buttons are also circular, they are tiny but well raised so extremely tactile and clicky, nice!geekvape nova kit screen

At the top right corner of the side panel on the side to the right of the control panel (phew!) is a tiny little notch, really nicely cut out behind the corner of the panel’s face. Put your nail behind it and the side panel comes away easily…it also replaces easily, with the help of two round magnets.

A neat battery chamber is revealed with a good quality, woven ribbon. The markings are clear and the fit is snug but not too much so.

Around the battery seats is a brushed aluminium panel with the AS chip brand, as well as the words “Geekvape knows better” printed on it.

Cerberus Tank

The Geekvape Cerberus sub ohm tank has a more modern feel to it. It has a 510 pin that looks very much like the 510 we find on our Smok tanks these days.

It has a thick base and top cap.

The bottom half of the base comprises an adjustable airflow ring, with one huge 12mm cyclops slot either side and knurling which is sweetly reminiscent of the ribbing on the resin elements of the mod.geekvape nova kit cerberus exploded view

Thee large Super Mesh coil head is visible through the bubble glass that’s installed on the Cerberus when it arrives.

Above the tank section, which has a 5.5ml capacity with the bubble glass, is another knurled ring, with Cerberus branding on it.

The flat top cap has a raised and similarly knurled seating for the 810 drip tip, which is removable.

The top cap twists off to reveal 2 large fill ports.

Machining is excellent and big, well-fitted o-rings make breakdown an easy task.

Accessories

I’m pleased about the inclusion of an extra coilhead, together with more o-rings and seals than I could possibly need in this lifetime. I didn’t receive a user manual, but then again I received a pre-sale sample so hopefully, you will get one with your purchase, lol!

How Does The Geekvape Nova Kit Perform?

Well, put it this way…when you take your first few hits of any kit and your smiling reaction with every hit is, Wow…that’s awesome….then you know you’re onto something good.geekvape nova kit hand

Let’s chat about the AS Chipset. Ramp time, at 10 milliseconds, is the best of the best. Responsiveness is absolutely top-notch throughout.

I get flawless new coil and resistance readings.

TC is smooth and accurate for Ni and SS and the power curve feature was a welcome surprise which, I am glad to say, works a charm. I didn’t expect a curve feature with this tiny screen but I’m pleased to say, Geekvape have made the five increment setting easy to use.

I appreciate the wealth of protections included with this chipset.

Now, one issue I’ve noticed is that my batteries are not draining at a balanced rate, generally, the one on the right is draining faster…it’s a good thing there are all those protections in place. I’m not sure if this is an issue distinct to my mod or whether this is a common flaw.

Cerberus Tank

Airflow is absolute perfection, from a heavy restricted hit right up to a slightly restricted open, the Cerberus airflow is smooth as smooth can be.Geekvape Cerberus tank

Even with airflow fully open and wattage dialled down to the lower spectrum for this coil…the tank is a cloud chucking beast.

I am hugely impressed with this full-featured mod, I’ve had absolutely no issues with it. The tank is well above and beyond the type of tank we often get with a kit, which can sometimes be a little below par.

The Cerberus is an outstanding tank, with a hassle-free fill and coil change and included coils that will knock your socks off.

How To Fill

  • Twist the top cap to the right
  • Fill through one slot
  • Replace the capgeekvape nova kit cerberus fill

How To Change the Coil

  • Separate the glass from the base by twisting
  • Unscrew the old coil from its seating
  • Replace
  • Prime
  • Attach base to tank
  • Fill
  • Enjoy

Stock Coil Performance

The Kanthal mesh coils included with this kit are the 0.2 Ohm X1 Super Mesh coils from Geekvape. They have a range of 30 to 90 W and a recommended range of 60-80.

At first I was irritated that a lower resistance, higher wattage coil had not been included, instead of two of the same.

Then I tested out the coils.geekvape nova kit cerberus x1 mesh coils

My God.

You absolutely could not find a fuller cloud, fuller flavoured 80W vape than this. Imagine the flavour and cloud of 120 W on the Smok Prince, only here you get it cooler and at 70W.

These mesh coils are phenomenal, rich, juicy, full flavour and equally rich, thick plumes of cloud.

A high wattage vaper like me can sit happily on these coils at 60 W, while the X1 and Nova Kit fool you into thinking you’re vaping at 100 and something watts.

As is to be expected, these coils drink juice for sport.

Apart from that, absolutely no complaints, full marks for the included coils.

How To Operate the Menu System

  • 5 Clicks on or off
  • 3 Clicks to access modes
  • Adjust buttons to scroll
  • Fire to select
  • Fire and up or down to adjust brightness

How To Replace The batteries

  • Pop off the battery cover
  • Remove batteries
  • Insert batteries according to the + and – markersgeekvape nova kit battery chamber

Battery Life

In spite of issues with uneven battery drainage, I found the battery life on a pair of Samsung 2500s to be above average, at around 10 hours regular vaping at 70W.

Pros

  • Classic look with gorgeous resin detail
  • Excellent Ramp
  • Outstanding Cloud
  • Outstanding Vapour Production
  • Great Battery Life
  • Scratch Proof Finish

Cons

  • Uneven battery drainage
  • Thirsty coils (To be expected somewhat)

Final Review Verdict

So…if you fancy the classic styling on box mods like the Stentorian Basilisk and Voopoo Drag but want a mod with an up to date chipset that has an outstanding ramp and an accompanying tank that gives you all the flavour and cloud that’s made mesh the talk of the vaping world, then the Geekvape Nova Kit is for you.

This full-featured mod and sub-ohm tank blew my socks off with scrumptious uber-clouds and more flavour and power than I even NEED!!!! Perfect for medium to high-level vapers and just about anyone who needs a little resin swirly cumulonimbus action in their lives.

And..

Would I buy the Geekvape Nova kit again if I lost/broke the device? Definitely.

Now It’s Available :GeekVape Nova 200W Kit

Hot Sale Recommendation:

Voopoo Panda

Hellvape Drop Dead RDA

Hellvape Dead Rabbit RTA

Vaporessso Polar Kit

Voopoo Vmate TC 200W Box Mod

Voopoo Vmate 200W Kit With Uforce T1 Tank

Vaporesso Luxe Kit

Vaporesso Luxe Mod

smok novo

dovpo topside

voopoo vfl

voopoo vfl pod

joyetech ultex

vladdin under kit

smoant naboo

vaporise drizzle

Review: Ijoy Pole Pod Starter Kit

The company Ijoy has released a starter kit Pole Pod Kit. The device focused on MTL soaring, gave a built-in battery with a capacity of 650 mAh and a maximum power of 15 watts.

June 6, the company Ijoy introduced in instagrame new all-in-one device –   Pole Pod Starter Kit . The device received a compact elongated shape with rounded ends and four colors. The body is made of aluminum alloy using oxidative technology. Topkep with a black drip tip and a small air hole was fixed on the flask and a long evaporator. At the top of the mod, there is an oval fire button with an integrated indicator and a USB port. Bottom mod decorated with the name of the model.

 

The board from Iwepal is protected from low voltage, short circuits and can disperse the device to 15 watts of power. The replaceable ceramic evaporator maintains a resistance of 0.1 Ohm, the total range is from 0.05 to 3 Ohms. Power is supplied by a built-in 650 mAh battery. Manufacturers did not specify the volume of the tank, apparently, it does not exceed 2 milliliters.

The package includes two evaporators, a silicone ring, a USB cable and instructions.

Main characteristics:

  • Height – 114.7 mm
  • Diameter – 16 mm
  • Maximum power – 15 watts
  • Built-in 650 mAh battery
  • Resistance – from 0.05 to 3 ohms

Now It’s Available :iJoy Pole Pod All-in-One Kit

Hot Sale Recommendation:

Voopoo Panda

Hellvape Drop Dead RDA

Hellvape Dead Rabbit RTA

Vaporessso Polar Kit

Voopoo Vmate TC 200W Box Mod

Voopoo Vmate 200W Kit With Uforce T1 Tank

Vaporesso Luxe Kit

Vaporesso Luxe Mod

smok novo

dovpo topside

voopoo vfl

voopoo vfl pod

joyetech ultex

vladdin under kit

smoant naboo

vaporise drizzle

Dead Rabbit RTA Review

WHAT’S IN THE BOXDead Rabbit RTA What's In The Box

The Dead Rabbit RTA comes in a nice little box, with a see-through window that allows you to see the tank inside. Open up the box and you get:

  • 1 x Dead Rabbit RTA
  • 1 x Standard Glass
  • 2 x 810 Resin Drip Tip
  • 1 x 510 SS Drip Tip Adapter
  • 1 x Bubble Glass
  • 1 x Spare Parts Bag
  • 1 x Instructional Manual

The Dead Rabbit RTA comes with a standard glass, as well as a larger capacity bubble glass. It also comes with a black and white drip tip, as well as a drip tip that matches the color of your tank.

  • 25mm Diameter
  • Dual Coil RTA
  • Raised, Four-Post, “Rabbit Ear” Build Deck
  • Top FIlled
  • Leak Proof
  • Dual, Top Airflow Redirects Air Into Inner Chamber
  • Max 4.5mL Juice Capacity w/ Bubble Glass

DESIGN & BUILD QUALITY

  • Dead Rabbit RTA Design
  • Dead Rabbit RTA Design

First impression: this tank is really really nice. At 25mm, it’s slightly bigger than most other RTA’s, and it looks the part. The Dead Rabbit RTA has smooth rounded edges, and a thick, wide top cap section that gives it a bold and high-end appearance. The machining on the outer body is very clean, and super well-built. The top cap and atomizer plate also feature the same knurling for grip as the original Dead Rabbit RDA.

This tank comes with two drip tips, both of which are 810 and made of resin. One is black and white, while the other will color-match your tank. In my case, I got the blue tank with the light blue drip tip. Both drip tips are quite low profile, and have a soft-touch feel to them that is very pleasant on the lips. What isn’t pleasant though, is how much this tank heats up. After vaping for a while, you have to be careful not to burn your lips. For this reason, I would of preferred if the drip tips were a little taller.

The top cap on the Dead Rabbit RTA features the same knurling as the RDA, and twists off to fill. The threading is very well-machined, and the cap both comes off and goes on smoothly. The Dead Rabbit RTA has two large fill ports that are very easy to access and will accommodate most nozzles and droppers. When you’re finished, the top cap goes back on very snugly, so there’s no chance of it coming loose in your pocket. Nice.

The airflow is located at the top of the Dead Rabbit RTA and consists of two wide airflow slots. The airflow control ring has some notches on it that make adjusting the airflow easier, and it is fully adjustable. Interestingly, the airflow slots are slanted downward on the Dead Rabbit RTA, just like on the Dead Rabbit RDA. When you take a draw, air enters the airflow slots, goes down through openings in the inner barrel, and then hits your coils.

Personally, I’m not the biggest fan of top airflow RDAs because I find the flavor is never truly there. In my opinion, this is due to the fact that the air never really hits the coil. Instead, air enters the top airflow, and almost instantly comes back out and into your mouth. That’s been my experience anyway with other top airflow RTAs, but I’ve heard that this one is supposed to be different. We’ll find how it performs a little later.

The chimney on the Dead Rabbit RTA is rather narrow, and encloses the deck to enhance and concentrate flavor. The outer barrel features an engraving of the Dead Rabbit logo that we all know and love. Dead Rabbit is also engraved on the other side of the outer barrel.Dead Rabbit RTA Design and Build Quality

There are two glass sections that come with the Dead Rabbit RTA: a standard glass section, and a larger capacity bubble glass section. The standard glass will hold 2ml of eliquid and is TPD compliant. But the real star here is the included bubble glass section, which increases your eliquid capacity to 4.5ml. In my opinion, the bubble glass makes the whole tank look just that much better, while having a practical purpose as well.

The build deck on the Dead Rabbit RTA is almost identical to the RDA, but with the addition of wicking holes. True to the name, there are four posts that are shaped like rabbit ears. Your coils are inserted from the top, and are secured from the side. The great part about the Dead Rabbit RTAs build deck is that it allows you to drop in your coils, secure them, and clip them afterwards. No need to pre measure your leads, as there is ample room to fit your wire cutters, and trim after securing. The wicking holes are rather large, and will allow plenty of room to fit your cotton. Looking at the deck, it’s a bit of a dejavu from the RDA. But that’s actually something that I was hoping for. The original deck was so great and easy to use, that I’m glad they kept it around.

Overall, the build quality of the Dead Rabbit RTA is very good. Hellvape and Heathen definitely didn’t slack when it came to this RTA, and instead have built something extremely sturdy. The top airflow is a little concerning, but I’m glad that they kept the same deck. I’m hoping the performance is as good as the build quality, but first: we have to put a build on it.

Focus On www.ave40.com For More Vape Tank.


BUILDING ON THE DEAD RABBIT RTA

  • Dead Rabbit RTA Building On
  • Dead Rabbit RTA Building On
  • Dead Rabbit RTA Building On
  • Dead Rabbit RTA Building On

Building on the Dead Rabbit RTA is very similar to the original. That is, it’s great because there isn’t a lot of prep work to do before you install your coil. To get started, unscrew your screws from your posts. Next, take your coils, and drop them into the posts.

Because of the rabbit ear styled posts, you won’t need to precisely measure your leg length. Instead, you can secure your coils first, and trim the legs after. There is more than enough space between the bottom of the posts and the deck to allow a pair of wire cutters to fit (Note: I would suggest positioning your coils quite high, so that you get the full effect of the airflow).

The design of the deck makes it very easy to install your coils, and setting up your wicks is even easier. You’ll want to cut your wicks so that they barely fall into the wicking ports. You don’t want to overstuff the wicking ports, or you might end up with leaking around the base of the glass. Make sure to thin out your cotton, and prime your coil.

Once this is done, all that’s left to do is to put the tank back together and fill er’ up! Wait a few long minutes for the wick to be fully saturated, and you’re good to vape!


VAPING PERFORMANCEDead Rabbit RTA Performance

Usually when something is overhyped to all hell, it doesn’t quite live up to the high expectations that are set. And i’m not going to lie, the Dead Rabbit RTA is no different. While it isn’t the absolute best RTA of all time, it does produce some amazing flavor that is shockingly good for a tank.

But I heard some people saying that it was as good in flavor as the RDA, and that’s definitely false. The flavor on this thing is superb, but the Dead Rabbit RDA is one of the best, if not the best, RDA of all time depending on who you ask.

For a top airflow tank, the flavor is very good. The downwards slanted airflow slots help to funnel the air towards the coils, but you have to have your coils up pretty high to get this benefit. Otherwise, I found the flavor was rather muted with the coils down lower.

The airflow on the Dead Rabbit RTA is also pretty quiet, and pulls very smooth. I found that this tank delivered the best flavor when the airflow was fully open.

A last but very important point, this tank doesn’t leak. At all. Because of the top airflow and snug top cap, I didn’t experience any instances of leaking. This is something that greatly increased the joy of using this tank. I’m sure you’ll understand me here.


FINAL VERDICT – Heathen & Hellvape DEAD RABBIT RTADEAD RABBIT RTA

Overall, the Dead Rabbit RTA delivers a very enjoyable vaping experience, and the vapor is very smooth and flavorful. I was surprised that a top airflow RTA could produce flavor that was so good, and I think you’ll be pleasantly surprised with it as well.

The machining and build quality are also top notch, and this is a tank that will look beautiful on almost any mod. If you’re looking for a new RTA, check out the Dead Rabbit RTA.

Now It’s Available :Hellvape Dead Rabbit RTA

Hot Sale Recommendation:

Voopoo Panda

Vaporessso Polar Kit

Voopoo Vmate TC 200W Box Mod

Voopoo Vmate 200W Kit With Uforce T1 Tank

Vaporesso Luxe Kit

Vaporesso Luxe Mod

smok novo

dovpo topside

voopoo vfl

voopoo vfl pod

joyetech ultex

vladdin under kit

smoant naboo

vaporise drizzle

 

 

OVERVIEW OF THE WISMEC LUXOTIC MF BOX KIT. ANOTHER VARIATION

WISMEC does not cease modifying Szvonk-mods, varying the possibility of control, circuit boards, complete atomizers, and today the guest of the editorial board is the WISMEC Luxotic MF Box Kit, which supports changing the chips by the user, the ability to work as a regular mod, and also as a skvonk version, and Use with several types of batteries.

The kit came to the test in a composite box, where the image and the name of the device, the company logos, as well as information of the fact-finding and warning character are hidden on the edges.

WISMEC Luxotix MF Box Kit:
1 * WISMEC Luxotic MF Box;
1 * Atomizer WISMEC Guillotine V2;
2 * Adapter for 18650 battery (silicone and plastic);
1 * Contact area under 18650;
1 * Additional drip-type;
1 * Mehmodovskaya fee;
1 * Beauty ring;
2 * Intended spirals;
1 * Cotton strip;
11 * Spare screws;
1 * Standard pin;
4 * Spare o-rings;
1 * Hex key;
2 * User Manual;
1 * Warning card

From the previously released WISMEC Luxotic MF Box series, I liked the most: it combines elegance, design, high-quality assembly and functionality that the user can vary “for themselves”.
I will not say anything critical about the size, weight, assembly and appearance of the box mod – everything is at a high enough level, there is nothing superfluous, for example, protruding buttons or stupid mode switches. In the hand, the device is comfortable, and slightly rounded corners only emphasize changes in the form factor.

Parameters of the WISMEC Luxotix NC box mod:
Dimensions:  87 mm * 47.5 mm * 27.6 mm;
Color:  Black, Silver

The front part of the device is occupied by a decorative insert imitating rings that determine the age of the tree, a small BW display and adjustment and navigation buttons.
Behind it is a recessed inside button, which causes the hidden inside the skvonk-vial to feed the rip liquid.

On the right side there is a square, slightly rattling “Fire” button, and on the left – a small notch in the upper part, which allows the user to access the battery compartment.

The lower part is empty, and at the top is the painted name of the kit and the platform, which allows you to install not only the complete atomizer, but also your own, up to 27 mm in diameter.

After removing the lid, we see the adapter for the 18650 battery, as well as the standard silicone skonk-bottle, which can be replaced with an additional battery of the same 18650 format using the complete contact pad. And in the out-of-box assembly, the device works from one 21,700, which is also very, very good in terms of autonomy.
Svonk-version performs its function perfectly: the bottle is responsive to the touch of a button, it does not siphon and feeds the drip well.

This time, WISMEC decided to go in a rather interesting way, and if you are a fan of furs, you can replace the standard board that supports the modern modes with mechmodovskaya: it also comes bundled. I do not disassemble the device and be content with a pre-installed chip, but who will be interested in it – look for replacement videos on the network.

Device management is standard: –
On / Off – press the “Fire” button five times. The screen displays power, temperature, resistance, charge indicator, mode name, voltage, current / puff count / puff time counter;

– Blocking / unlocking buttons – simultaneously hold down “+” and “-“;
– Entering the mode selection menu – pressing “Fire” three times;

-Change the current indicator for the time / number of puffs – hold down “Fire” and “+”;

-Activating / deactivating the stealth mode – hold down “Fire” and “-“;

In case of problems, the system will notify you by means of a corresponding information message on the screen.

Characteristics of the box mod WISMEC Luxotic MF Box: 
Maximum power: 1-100 watts;
Operating modes: VW, TC (Ni, Ti, SS), TCR (M1, M2, M3), Bypass;
Power supply:  One / Two high-current 18650 batteries (via adapters) or one 21,700;
List of protections: Short circuit, cut-off 10 seconds, low voltage, low resistance, overheating, overcharging.
Boards included: Variable Voltage, Direct output

Included with the WISMEC Luxotix NC is a WISMEC Guillotine V2 atomizer, which has changed somewhat compared to its predecessor. In particular, the design of the skirt has changed a bit due to the addition of decorative engraving, and also the resin drip-type has been changed to Ultem-version. And so, this is all the same Guillotine V2, known to users.

Parameters of the atomizer WISMEC Guillotine V2:
Height (with drip-type and pin) : 34.8 mm;
Diameter: 24 mm (without a beauty ring) and 25.5 with a ring;
Bath depth: about 10 mm;
Color: Silver, Black

Atomizer WISMEC Guillotine V2 consists of 5 parts: base, skirt, top cap and drip-type, not counting the beauty ring.

The base is implemented with guillotine clamps and screws arranged in pairs, responsible for raising / lowering the fixing platforms.
The bath is quite deep, and the airflow is carried out from below, through two holes arranged in pairs, adjustable by a skirt.

The skirt is medium in thickness, made of Stainless steel and has two parallel holes in the lower part to adjust the blowing and engraving.
If you are not satisfied with the lower airflow – turn the skirt upside down and get the overlapped lower airflow and adjustable using the top cap of the top. Convenient, isn’t it?

The preset 810 drip-type is made of Ultem-plastic. It is attached with an o-ring hidden in the top cap, it doesn’t heat up very much during work, but if you don’t want your lips to touch the lid, you can use the high version, which also comes in the kit.

With the installation of the spirals and the laying of cotton there are no problems, you just need to get used to the fact that the clips fix two spirals at the same time, and perhaps at first, it will be a bit unusual. After some time, you will get used to it, and the racks will no longer cause discomfort in the maintenance of the dripka.

Characteristics of the atomizer WISMEC Guillotine V2:
Base: Two-rack, two coils;
Airflow: Lower / upper;
Refueling: top;
Drip type: 810 (Ultem);
Connector: 510 type, pin – standard and skvonk

PROS

The possibility of replacing the board;
Support 2 types of batteries;
Taste transfer atomizer;
Comfortable racks;
Lower airflow;
Simple operation

MINUSES

Lack of batteries included;
Power is 100 Watts;
Price

SUMMARY

I liked the WISMEC Luxotic MF Box Kit the most than its predecessors.
I can not single out the critical flaws, that’s fair. What is box mod, what is an atomizer – show themselves exclusively from the positive side. WISMEC – Well done, do not say anything! BoxMod is autonomous, functional, easy to maintain and use, does not deliver inconvenience to the user. Of course, with such a gentleman’s set, it would be possible to increase the power of a watt to 200, but even with the “hundred” on board it is quite possible to live (I generally hover at 65-75 watts), so this is more of a nagging rather than negative.
According to the complete atomizer WISMEC Guillotine V2, there are no complaints either, it suited me. The updated version has a good taste transfer, convenient service and a deep bath, which is important when choosing a drip. It is not endowed with some pretentious design, but it still looks elegant, does not give the impression of cheapness.
The price of the kit is about $ 108. Of course this is a lot, but my opinion – the kit absolutely justifies this figure. But if the manufacturer applied 21700 to the kit, the whale would be torn off with arms and legs, which of course, in principle, would be without it.

The new luxotic kit has been released,click here to know:wismec luxotic DF box mod kit 

Now It’s Available :Wismec Luxotic BF BOX 100W Kit with Tobhino BF RDA

Hot Sale Recommendation:

Voopoo Panda

Hellvape Drop Dead RDA

Hellvape Dead Rabbit RTA

Vaporessso Polar Kit

Voopoo Vmate TC 200W Box Mod

Voopoo Vmate 200W Kit With Uforce T1 Tank

Vaporesso Luxe Kit

Vaporesso Luxe Mod

smok novo

dovpo topside

voopoo vfl

voopoo vfl pod

joyetech ultex

vladdin under kit

smoant naboo

vaporise drizzle

 

Snake in the Shadow of an Eagle: Sibra F Kit by Sigelei

Sigelei has released the Sibra F Kit. In the “snake” set they included a mod powered by a built-in battery with a capacity of 3000 mAh and a maintenance-free tank of 5.5 ml Sobra mini Tank.

July 18, the company Sigelei announced on Twitter all-in-one set – Sibra F Kit . Cylindrical mod made of brass and decorated with a coating depicting snake scales. The choice provided five color variations, each with its own unique pattern. The front side was supplied with a hexagon fire button in the color of the case and the model name from the bottom. On the back made a USB port.

The device is powered by a built-in 3000 mAh battery, it should be charged through the USB port with a current of up to 2A. The output voltage can reach 4.0 volts. The resistance range is 0.15 to 3.0 ohms.

The complete Sobra mini tank is made of stainless steel in a similar “serpentine” style and is equipped with a wide-profile eagle epoxy resin drip-type. Topkep is equipped with a rotating cover that hides the side opening of the filling. The expanded flask can hold up to 5.5 milliliters of fluid. The device works with branded evaporators at 0.28 ohms. Tightening is regulated by the usual ring below.

The package includes two evaporators, additional glass, USB-cable, a set of spare parts and instructions.

Main characteristics:

  • Fashion size – 127 by 24.5 mm
  • Built-in 3000 mAh battery
  • Charging current up to 2A
  • Output voltage 2.5 to 4.0 volts
  • Tank size – 48 to 24 mm
  • Tank capacity – 5.5 ml

Focus On www.urvapin.com For More Latest Vape News.

Now It’s Available :Sigelei Sibra F Kit 2ml

Hot Sale Recommendation:

Voopoo Panda

Hellvape Drop Dead RDA

Hellvape Dead Rabbit RTA

Vaporessso Polar Kit

Voopoo Vmate TC 200W Box Mod

Voopoo Vmate 200W Kit With Uforce T1 Tank

Vaporesso Luxe Kit

Vaporesso Luxe Mod

smok novo

dovpo topside

voopoo vfl

voopoo vfl pod

joyetech ultex

vladdin under kit

smoant naboo

vaporise drizzle

Smoant Naboo 225W TC Starter Kit Review

Navigating the Menu of the Naboo

There are three “themes” the user can choose from, Classic, Music, or Dial. To close out of the menu system the user holds down the fire button for 2-3 seconds. This will bring the user back to the active, information rich screen, in the chosen ‘theme’.The Smoant Naboo is a 5-click on/off, 3-click to the menu mod. Through the menu the user can set the Naboo for Variable Wattage, Temperature Control, Wallpaper, and General Settings. General settings include brightness of the display, set the time, and timeout, screensaver, and vibrate mode.

3-Clicks – 4 Modes – Use touch icons to move between them, then press the Fire Button. Use the touch icons again to navigate inside the Settings Mode. Hold the Fire Button Down to back out of the Menu

The Smoant Naboo Mod Feature Highlights

The default wattage when firing up the Smoant Taboo the first time is 5W. Once the Naboo Sub-Ohm Tank was attached and filled with eJuice, I set my wattage to 60W. Because the preinstalled coil head is the 0.18ohm Mesh OCC rated for 40-80W, I figured starting in the middle range would be the right choice.

NoteMake sure you have clicked the side button to close the touch-sensitive adjustment icons. Leaving them visible WILL cause the Naboo to increase or decrease the wattage or temperature if the user accidentally touches either one. I learned this from experience.  Smoant calls this their Independent Lock Button. In any case, the touch adjustment buttons do not go away unless the button is pressed to close them.

Inside the Smoant Naboo Mod sits the newest version of the Ant225 chipset, and in addition to the wattage and temperature range, as well as the other various modes available to the Naboo because of the chipset, the biggest improvement is the incredible ramp up speed of 0.015s. The Naboo is the fastest Smoant mod ever, throwing vapor instantly after pressing the fire button.The Smoant NABOO 225W Starter Kitlooks similar to the SMOK X-PRIV, both in shape, corners, and overall size. However, unlike the X-PRIV, the Naboo has a Fire Button, not Fire Panel. Even the full-size rear battery door has a pattern loosely modeled after the cobra pattern on the X-PRIV.

The large 2.4″ TFT Color Screen is indeed color, but the colors are set. You can change the Themes, which will display a completely different GUI, but you cannot customize the colors of fonts, numbers, etc… Despite not being an HD display, the wallpaper background choices look very good.

The extensive temperature control suite, while certainly suited to be used to customize the users vape experience with different heating elements, SS, Ni, Ti, both Coil Heads that come with the Naboo Sub-Ohm Tank are made with Kanthal heating elements.

Focus On www.urvapin.com For More Vape Start Kit.

The Smoant Naboo Sub-Ohm Tank

I made my own decision a couple of months ago about Mesh coils, and the Naboo Sub-Ohm further supports that decision. Mesh Coils are the best thing to come along for sub-ohm tanks in a long time.

A Mesh Coil is designed so that its heating element has an order of magnitude more surface space than a simple coiled wire. With an enormous surface sitting in the center of pure organic cotton, when heat from the mod is sent to the coil so much more eJuice is instantly vaporized, causing big clouds of vapor and the richest flavor available.

There are variations in the Mesh Coils, resistance, the number of coils in the head, and so on, but there is no doubt that Mesh is here to stay. In the Naboo Tank, both Mesh coils produce wonderful flavor and huge clouds.

The Naboo Sub-Ohm Tank has a 4mL maximum eJuice capacity, plus dual bottom airflow slots that allow plenty of air to enter the chamber. Like the recently reviewed Augvape Skynet, the Naboo Tank has a threaded top-fill design. Unscrew the top cap to reveal two large fill slots. Using one slot to fill, the other slot is used to allow the displaced air in the tank to escape faster. The result is a less messy, and faster fill.

Naboo Mesh OCC Coils

Made with high-grade stainless steel, the most notable part of the coil heads is the enormous eJuice ports. I sincerely doubt anyone could get a dry hit caused by a strong draw on the wide bore drip tip. Just as fast as the eJuice vaporizers, it is replaced into the cotton through these large ports. (SMOK take a note here). It should be noted here that Smoant has designed the Naboo Tank for full compatibility of SMOK Prince Coil Heads, which is great is users have stocked up on Prince Coil Packs, otherwise, I like the Smoant Coil Heads more than SMOK’s.

At the time of this review, official replacement coils for the Naboo Tank are few and far between. Hopefully Element Vape will have them in stock shortly.

Right now, there are two Coil Heads available for the Naboo Sub-Ohm, the 0.18ohm Mesh OCC (40-80W)
and a 0.17ohm Mesh OCC (60-100W). I can’t see or taste much of a difference between the two, other than the 0.17-ohm does allow for an optimal wattage for myself at 88W.

Vaping with the Smoant Naboo Starter Kit

The Naboo Kit is available in 4 colors, with match sub-ohm tanks; Black, Rainbow, Red, and Stainless Steel (silver). All 4 use the a unique resin 810 wide bore drip tip.

The Naboo is a full-size mod and tank, and with two 18650 batteries installed it has a hefty and sturdy feel to it. The Naboo is also very comfortable to hold for long periods without fatigue. While the Smoant Naboo Mod offers plenty of range, 1W-225W, and the Naboo Sub-Ohm offers great flavor and ample clouds, I enjoyed vaping with this kit every bit as much, and maybe even more, as I did with most of SMOK’s Kits.

The Naboo Sub-Ohm uses eJuice quickly, but that’s pretty much par for the course these days in high performance sub-ohms.

highly recommend the Smoant Naboo Starter Kit for two reasons; Smoant delivers a touch device that is both innovative and non-frivolous, and the price to value is excellent. If or when you decide to bring your own Naboo Starter Kit home, please remember to make sure the touch-sensitive adjustment icons are turned off before using it.

Focus On www.urvapin.com For More Latest Vape News.

Now It’s Available :Smoant Naboo 225w Kit

Hot Sale Recommendation:

Voopoo Panda

Hellvape Drop Dead RDA

Hellvape Dead Rabbit RTA

Vaporessso Polar Kit

Voopoo Vmate TC 200W Box Mod

Voopoo Vmate 200W Kit With Uforce T1 Tank

Vaporesso Luxe Kit

Vaporesso Luxe Mod

smok novo

dovpo topside

voopoo vfl

voopoo vfl pod

joyetech ultex

vladdin pod kit

smoant naboo

vaporesso drizzle

Ijoy Stick VPC Pod Kit – old top, new low

The company Ijoy sprinkles straight news. Not so long ago we got acquainted with their peculiar set called katana. And here we have on the table again a new whale stick. However, now we will only meet with his half, and the bottom. All because, we already met the atomizer. That is how I understood it, since the official website did not shed the truth on this question.

Ijoy Stick VPC Pod Kit 
Ijoy Stick VPC Pod Kit - old top, new low ...
Dimensions: 108 x 19mm
Weight: unknown
Case material: stainless steel + plastic
Power: built-in 1100mAh
Cartridge capacity: 1.6ml
Evaporator resistance: 1.6Ω
Output power: up to 15W
Operating mode: POWER
Supported Resistance: 1.0 – 3.0Ω
Protection: Low / high resistance, overheating, short-circuit, overcharge / overdischarge
Connector Type: Steel 510, spring loaded
Micro-USB port / charging: there
color: see photo below
Ijoy Stick VPC Pod Kit - old top, new low ...
Options
– Stick VPC Pod mod
– VPC Unipod adapter
– VPC 1.6 Pod
– USB cable
– user manual
– warranty card

Ijoy Stick VPC Pod Kit - old top, new low ...
However, it is worth mentioning here, for some reason, the declared capacity of the cartridge is not 2, but 1.6ml. The rest seems to be changes, I have not noted.
Ijoy Stick VPC Pod Kit - old top, new low ...
Ijoy Stick VPC Pod Kit - old top, new low ...
In general, such a set looks much more organic than the “diamond” predecessor. Neat, not very large, and preferably relatively compact stick. Ergonomics should be quite decent.
Ijoy Stick VPC Pod Kit - old top, new low ...
The color spectrum is bright, juicy, however, as usual.
Ijoy Stick VPC Pod Kit - old top, new low ...
Connector, by the way, 510 – standard. Therefore, you can wind at least something, of course, if you find an atomizer 19mm in diameter.

Inside the mod, a built-in battery of decent capacity hides from the outside eyes. However, the charging current is unknown, let’s hope that it will provide a charging time of not more than one and a half hours. Connector for these purposes, the developers have placed on the side end.
Ijoy Stick VPC Pod Kit - old top, new low ...
Next to it you can see the oblong fire button. It is girded with a three-color LED battery level indicator.
Ijoy Stick VPC Pod Kit - old top, new low ...
Performance, of course, penny. In short, it turned out a kind of exotic starter.
Ijoy Stick VPC Pod Kit - old top, new low ...
Ijoy Stick VPC Pod Kit - old top, new low ...

Focus On www.ave40.com For More Latest Vape News.

Now It’s Available :IJOY STICK VPC POD KIT 1100mAh

Hot Sale Recommendation:

Voopoo Panda

Hellvape Drop Dead RDA

Hellvape Dead Rabbit RTA

Vaporessso Polar Kit

Voopoo Vmate TC 200W Box Mod

Voopoo Vmate 200W Kit With Uforce T1 Tank

Vaporesso Luxe Kit

Vaporesso Luxe Mod

smok novo

dovpo topside

voopoo vfl

voopoo vfl pod

joyetech ultex

vladdin under kit

smoant naboo

vaporise drizzle